NOTE:

I do not make, sell, or traffic in bootleg/recast dolls or any other product.

I do not provide information on where or how to buy them.

Any recast information on this blog is for information purposes only, for identifying recast products on the second hand market.


Showing posts with label dollmore. Show all posts
Showing posts with label dollmore. Show all posts

Monday, December 12, 2016

How to Care for a BJD Wig- WIP



I'll update this as I get more photos and tutorials together, so I'm marking this as a WIP for my own memory. 

Products

Generally speaking, be cautious about what products you put on a wig. You'll want to know whether the fibers are natural or synthetic, and what products will work and won't work on the wig.
  • Volks makes a neutral wig wax here.
  • Dollmore has a nice wig spray here.
  • I've personally used a little human hair gel and a few other products to tame wild hairs.
  • Don't wash a bjd wig unless you know that it has been sewn and not glued. If you wash a glued wig it can fall apart!
  • Store your wigs in a wig net when not in use; this will protect them from damage.
  • Keep a ball of tissue or other paper inside the wig to help it hold its shape.  
  • Be careful to avoid products with oils in them that might sit for too long on the doll's resin and stain or ruin that area.

Heat Styling
  • You can boil heat resistant fibers and scrunch them into curls. Don't use this method on non heat resistant synthetic fibers or on glued wigs. I've used this method on vinyl dolls and for Ginny Doll restoration and had great results.
  • Flat Irons/Curling Irons should only be used on heat resistant fibers. You can use these on most natural fibers as well, but be sure to test all wigs underneathe where any damage won't be seen just in case.

Wet Styling

  • For most wigs, you can use a spray bottle to lightly wet the fibers of the wig and then wrap the sections around a tool, like a pencil or straw. When the hair dries you'll have a curl.
  • You can use this to set most styles, not just curls.

Reminder though, if the hair is glued, be sure not to get the wig cap wet!

Combing
  • Don't brush curly wigs! You'll end up causing the curls to separate and end up with a fuzzy mess like this:
  • If you must tidy a curly wig, boil the wig and scrunch the hair back up, or manually redo each section of curl with a wet styling method.
  • Long wigs will tangle even when just sitting pretty. Comb them very gently with a wig comb, wire doll hair brush, or your fingers. Start at the ends and work your way up. Be as gentle as possible to minimize the loss of fibers.

Removing Sheen

Got a synthetic wig with too much shine? Never fear! Follow these steps to reduce the shine and give it a more natural, and expensive look.

  • First, get yourself some hair spray. (I've been lazy and used MSC, but I don't recommend this as it's expensive. If you do use it, wear a respirator.)
  • Remove the doll's wig and place it on something else, like a soda bottle.
  • Spray the hair with a light mist of hair spray and sprinkle baby powder or talc on top. Comb it through gently. Comb and shake the wig to remove excess baby powder.
  • Repeat as needed.
  • The baby powder will stick to the fibers of the wig and reduce the shine.

This technique took this wig from Kemper:

http://kemperdolls.com/wigs/modacrylic-wigs/althea-turquoise-modern-wig.html


And turned it into this:
Brictom

I hope this basic little guide is handy. If you want any more info or have any more questions about wigs, rooted hairs, or fibers, feel free to ask in the comments.

Thanks for reading!

Monday, July 18, 2016

Clothing a Zaoll- In Progress

Zaoll are very tiny and a bit oddly sized. Here's a few things I've been learning about what they can and can't wear:

Shoes:
  • Most SD13 shoes, especially heels, are too narrow for their feet. 
  • SD16 heels all seem to fit, including these ones from Snake Eye BJD.

#3, the Snake Eye shoes fit, so most of these should fit pretty similarly since Moe also has wide feet.

Monday, July 4, 2016

Zaoll Body Posing

Disclaimer:

In these photos she has the Feeple 60 double jointed arms. Zaoll default arms are single jointed and cannot do much. Also all these pics were taken at night in those precious hours when the spawn are asleep so pardon the crap quality and the flash. XD I take my moments where I can get them.

She has also been sueded and will soon be wired to help with her posing.

As I mentioned in the review on her when I initially got her, she is single jointed. This does affect the posing ability.

There are several different modifications and such that you can do to improve upon this, including sueding and wiring, as well as poseability modifications to the joints themselves. I'm going to be attempting some on the arms soon and will post when I get around to that.  For now, here is what I was able to get her to do.

It is more than I thought I'd be able to do, and I should note that I can *almost* get her to balance on one leg. She needs ankle support and then I think she'd be able to do it.

First, here is the body with Feeple 60 Moe WS arms attached:

Monday, June 20, 2016

Review Time: Dollmore Zaoll Dreaming Luv

I purchased this pretty little lady second hand from a friend, so I can really only give my opinion as to quality of the doll. I can relate my friend's experience with Dollmore and my own from ordering Dollmore clothes.

Site: Dollmore.com

Ease of Ordering: Always easy to order from, uses paypal to pay. Can't complain there.

Speed: Dollmore is always pretty quick on shipping things, even dolls (my friend who orders frequently says it usually takes around a month). I've never had an excessive wait from them. When they make mistakes they're pretty good about fixing them.

Clothing: The clothing is usually pretty well-made, with a variety of things to choose from. In my early days I preferred to shop there or Alice's Collections. So it's really a taste factor.

Onto the doll herself!